Revo Fiesta Mk7 ST180 and Zetec S | Big Brake Kit | Mono 4

This Revo brake kit has been manufactured in conjunction with world leading brake manufacturer Alcon; utilising over 30 years of motorsport braking innovation only the best materials, techniques and processes have been used.
332 x 28 mm – Red Caliper – RF031B100100332 x 28 mm – Silver Caliper – RF031B100200332 x 28 mm – Black Caliper – RF031B100300
Please note: Trade customers must call before ordering REVO products.

From £2,075.22 (inc VAT)
£1729.35 (exc VAT)
Clear

Technical Data


Revo Fiesta ST180 Brake Kit
Please note: This product is not eligible for trade discount or reward points.
Mono4 332 x 28mm
Revo brake systems are engineered to improve your stopping power under any condition. Our brakes, derived from race-winning technology, provide exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop.
Alcon’s race-winning technology, derived from the highest echelon of motorsport such as Formula 1 and the World Rally Championship, provides the following benefits:

No more fade — Higher heat absorption and dispersion for shorter stops, turn after turn.
No warping — Specially designed two-piece floating rotors for quiet, warp-free performance.
Quicker reaction time — Short consistent pedal travel can save your life in a panic situation.
Improved pedal feel — Firm confidence-inspiring brake pedal due to ultra-stiff calipers, differential piston sizing and stainless steel braided lines.
Less weight — Enables shorter stops, quicker acceleration, improved steering feel and handling.
Lower long-term maintenance costs — Cutting-edge design in a durable, low-cost system.
Compatibility and ease of installation — Compatible with ABS and traction control systems with brake bias designed to ensure ultimate gripping power; all hardware is included to ensure a quick and seamless installation.

KIT CONTENTS:

2 x Alcon calipers (Weight: 3.3 KG each)
2 x Alcon discs (Weight: Fully assembled 7.66 KG each 332mm)
2 x 6061 aluminium anodised bells
2 x 6061 aluminium anodised caliper bracket
NAS fasteners for bell/disc assembly
10.9 and 12.9 hardware for caliper installation
2 x Hosetechnik stainless steel brake lines
Motul Dot 5.1 high performance brake fluid
Ferodo DS Performance brake pads

BRAKE CALIPERS:
Revo by Alcon calipers are cast from one piece of aluminium. This single casting design with the cross bridges cast in place creates a very stiff unit and very little compliance during braking. Less compliance means less pedal travel because the brake fluid is only applying force to the pistons, not bending the caliper. This applies the maximum amount of force to the Ferodo performance brake pads.
Our brakes use ultra-high-resilience piston seals, with proprietary retraction angle shape, minimising piston travel distance for less dead pedal travel and resulting in better pedal feel in the vehicle.
BRAKE DISCS:
Properly designed two-piece floating discs = quiet, warp-free performance.
When brakes are applied and the moving energy (kinetic energy) is converted into heat, the disc expands radially and axially (diameter and thickness). Revo uses a floating disc that can thermally grow separate from the bell. This design is superior to a one-piece disc—when a one-piece disc is overheated, it gets much hotter than the bell and they expand at different rates, causing warpage or cracking.
Revo Floating Disc Construction
Racers have long used floating disc technology, but the discs found on race cars move freely on the floating pin drive connecting the bell to the disc, causing noise. To eliminate the rattling race disc for our street car customers, we have engineered a unique noise-reducing methodology that eliminates noise but still allows for thermal expansion without running out of “float.”
Crescent Grooves
Crescent grooves in the surface of our Alcon brake disc perform three basic functions:

Increases initial friction between the disc and pads, producing more bite
Continuously refreshes the brake pad surface by removing debris from the pad
Prevents build up of gas from the phenolics within the pads

Vane Design
Our brakes use either 48 or 252 vanes, depending on application, to draw air from the centre of the disc outward. These vanes work like a pump to move cool air through the centre of the disc, taking the heat away from the disc and cooling it before the next heavy braking zone.
Combining the highly advanced iron alloy with the efficient aerofoil vane design allows the disc to absorb large amounts of energy (heat), then eliminate heat quickly so that it is not transferred to the calipers, pads, and brake fluid, providing consistent stopping power over multiple applications for your vehicle.
BRAKE PADS:
Ferodo DS Performance Brake Pads offer low and high speed braking efficiency, reduced stopping distances and a consistent brake pedal feel from the start. This new generation of friction material is very low in compressibility ensuring a firm pedal, whilst still providing low wear rates for discs and pads. Combined with low wheel dusting and good noise characteristics, this compound is the brake pad for the driver who demands the ultimate in track day braking performance.

Low noise / low dusting
Long pad life
Kind on discs
Race pedal feel

BRAKE LINES:
Hosetechnik Stainless Front Brakeline Kit
Hosetechnik Stainless Brakeline Kits are manufactured with the finest quality hose, consisting of a PTFE inner and stainless steel braided outer to improve braking performance, eliminate the spongy feel of the original rubber hoses, and provide superior resistance to abrasion and corrosion. These kits not only provide the reliability and safety demanded in a brake system, but offer good looks that improve the appearance of any installation.

Eliminate sponginess
Reduce braking distance
Manufactured with the finest quality stainless steel braided hose
Superior resistance to corrosion
Stainlessd end fittings

BRAKE FLUID:
Motul Dot 5.1 brake fluid is a long life 100% synthetic brake fluid suitable for all types of hydraulic actuated-brake and clutch systems that require DOT 5.1, DOT 4 and DOT 3 manufacturers’ brake fluid recommendations. Particularly suitable for use with anti-lock braking systems (ABS).

Long life brake fluid
100% synthetic brake fluid from polyglycol bases.
Dry boiling point 270 °C / 518 °F
Wet boiling point 185 °C / 365 °

332 x 28 mm – Red Caliper – RF031B100100332 x 28 mm – Silver Caliper – RF031B100200332 x 28 mm – Black Caliper – RF031B100300
Please note: Trade customers must call before ordering REVO products.


Customers also purchased